We design from the ground up, literally. With a new deck, the roof’s weight is in the numbers from the first sketch, so posts, beams and footings line up to carry it down to soil. With a deck that’s already standing, we first measure whether its frame has any spare capacity. Frequently the answer means extra posts on new footings below the county frost line, or a deeper beam under the roof’s bearing line. At the house, we open up enough siding or soffit to see what the roof will hang from, then flash that joint so rain stays on the outside.
Pergolas weigh the least of anything we put over a deck. They can be wood or composite, fixed to the house or standing on four posts of their own, and a louvered roof or retractable canopy can be added to one later. Roofs come in two basic shapes: a single-slope shed pitched away from the wall, or a gable that repeats the line of the main roof, covered in shingles or standing-seam metal. Ceilings stay open or get beadboard. A screen room starts from a roof and adds panels, a door and sometimes a short knee wall, and it can later become a three-season room through our
patio enclosures work. Out in the yard, away from the deck, we also put up
pavilions and gazebos, including ClifRock’s Stone Bridge gazebo and Trenton pergola kits.
Gutter and downspout routes are drawn before construction so roof runoff lands clear of stair stringers and the foundation. Low-voltage cable for
deck lighting, plus wiring for fans and outlets, is run before the ceiling closes up. One proposal covers the design, the Boone County permit and the build.