How we build an outdoor fireplace
An outdoor fireplace is a small masonry building. It needs a foundation sized for its weight, set on undisturbed soil beneath the frost line. Southwest Ohio calls for a minimum of 30 inches below grade, while Kentucky and Indiana counties set their own depth. We confirm the foundation design for the fireplace you choose and the local code. When the fireplace stands at the end of a deck, the deck framing stops short of it and is supported independently, so the two structures do not move against each other.
Above the foundation, the firebox, smoke chamber and chimney are built from materials made for heat, then wrapped in natural stone, stone veneer or brick to match the house. Clearances to the deck boards, the roof framing and anything combustible vary with the fireplace type and the code, so each one is checked against your design before construction. Under a covered deck, the chimney has to clear the roof properly and the roof is framed and flashed around it so rain stays out.
Wood-burning fireplaces give you real heat and the sound of a fire and need a place to keep firewood dry. A gas fireplace lights with a switch or key and needs a gas line routed to it, which we plan before the deck or patio is finished. Either way, the hearth extends out in front of the opening in a non-combustible material, and we lay out the seating around it on your 3D design.
Many homeowners add more to the same wall: a TV niche above the mantel, wood storage on the sides, built-in benches or a wood-fired oven. Outlets and lighting get planned with the stone so wiring is hidden. Design, permits and construction are included in every Building Character fireplace project, including the footing, framing and final inspections.